Dirany, Ahmad; Drogui, Patrick ORCID: https://orcid.org/0000-0002-3802-2729 et El Khakani, My Ali (2016). Clean electrochemical deposition of calcium carbonate to prevent scale formation in cooling water systems. Environmental Chemistry Letters , vol. 14 , nº 4. pp. 507-514. DOI: 10.1007/s10311-016-0579-x.
Ce document n'est pas hébergé sur EspaceINRS.Résumé
Calcium carbonate (CaCO₃) deposited in water systems leads to scale formation, decreases flow rate, reduces heat transfer and favors microbial proliferation of toxic bacteria such as Legionella. This issue may be solved by electrochemical deposition, without adding toxic chemicals. Therefore, we studied here the deposition of CaCO₃ by electrochemical reduction of oxygen into hydroxide ions with stainless steel and titanium (Ti) working electrodes. Analysis was done using cyclic voltammetry, chronoamperometry, dynamic impedance spectroscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy (EDX) coupled with X-ray diffraction (XRD). Results show that optimal formation of CaCO₃ is done at −1.2 V with the stainless steel electrode and at −1.4 V for the Ti electrode. More negative potentials induce the formation of calcite. Using the Ti electrode, we found that aragonite is the major form (82 %), with only one capacitive loop. Using the stainless steel electrode at 1.2 V, we found 47 % of aragonite and 38 % of calcite. Overall, our findings demonstrate the feasibility of the electrochemical deposition of CaCO₃ in cooling water systems, without the addition of any chemical.
Type de document: | Article |
---|---|
Mots-clés libres: | calcium carbonate; voltammetry; chronoamperometry; electrochemical impedance spectroscopy; stainless steel; titanium |
Centre: | Centre Eau Terre Environnement |
Date de dépôt: | 04 mai 2018 19:37 |
Dernière modification: | 23 févr. 2022 19:20 |
URI: | https://espace.inrs.ca/id/eprint/5665 |
Gestion Actions (Identification requise)
Modifier la notice |