Optimization of Biomass Delignification by Extrusion and Analysis of Extrudate Characteristics.

Konan, Delon ORCID: https://orcid.org/0000-0003-2644-3662; Ndao, Adama; Koffi, Ekoun; Elkoun, Saïd ORCID: https://orcid.org/0000-0003-0501-6872; Robert, Mathieu ORCID: https://orcid.org/0000-0003-0943-1715; Rodrigue, Denis ORCID: https://orcid.org/0000-0002-3969-2847 et Adjalle, Kokou D. ORCID: https://orcid.org/0000-0002-0836-6395 (2025). Optimization of Biomass Delignification by Extrusion and Analysis of Extrudate Characteristics. Waste , vol. 3 , nº 2. p. 12. DOI: 10.3390/waste3020012.

Prévisualisation

PDF - Version publiée Télécharger (4MB) | Prévisualisation

Résumé

Pretreatment of lignocellulosic biomass remains the primary obstacle to the profitable use of this type of biomass in biorefineries. The challenge lies in the recalcitrance of the lignin-carbohydrate complex to pretreatment, especially the difficulty in removing the lignin to access the carbohydrates (cellulose and hemicellulose). This study had two objectives: (i) to investigate the effect of reactive extrusion on lignocellulosic biomass in terms of delignification percentage and the structural characteristics of the resulting extrudates, and (ii) to propose a novel pretreatment approach involving extrusion technology based on the results of the first objective. Two types of biomasses were used: agricultural residue (corn stover) and forest residue (black spruce chips). By optimizing the extrusion conditions via response surface analysis (RSA), the delignification percentages were significantly improved. For corn stover, the delignification yield increased from 2.3% to 27.4%, while increasing from 1% to 25.3% for black spruce chips. The highest percentages were achieved without the use of sodium hydroxide and for temperatures below 65 °C. Furthermore, the optimized extrudates exhibited important structural changes without any formation of p-cresol, furfural, and 5-hydroxymethylfurfural (HMF) (enzymes and microbial growth-inhibiting compounds). Acetic acid however was detected in corn stover extrudate. The structural changes included the disorganization of the most recalcitrant functional groups, reduction of particle sizes, increase of specific surface areas, and the appearance of microscopic roughness on the particles. Analyzing all the data led to propose a new promising approach to the pretreatment of lignocellulosic biomasses. This approach involves combining extrusion and biodelignification with white rot fungi to improve the enzymatic hydrolysis of carbohydrates.

Type de document:	Article
Mots-clés libres:	biomass pretreatment; extrusion; pretreatment optimization; response surface methodology; biodelignification
Centre:	Centre Eau Terre Environnement
Date de dépôt:	15 sept. 2025 19:36
Dernière modification:	15 sept. 2025 19:36
URI:	https://espace.inrs.ca/id/eprint/16601

Gestion Actions (Identification requise)

Modifier la notice