Dépôt numérique
RECHERCHER

Factors influencing the Zn and Mn extraction from pyrometallurgical sludge in the steel manufacturing industry.

Mocellin, Julien; Mercier, Guy; Morel, Jean-Louis; Blais, Jean-François; Simonnot, Marie-Odile (2015). Factors influencing the Zn and Mn extraction from pyrometallurgical sludge in the steel manufacturing industry. Journal of Environmental Management , vol. 158 . p. 48-54. DOI: 10.1016/j.jenvman.2015.04.039.

Ce document n'est pas hébergé sur EspaceINRS.

Résumé

In this laboratory study, a process has been developed for selectively leaching zinc and manganese from pyrometallurgical sludge produced in the steel manufacturing industry. In the first part, the yield of Zn extraction was studied using four factors and four levels of the Box-Behnken response surface design. The optimum conditions for the step of Zn leaching were determined to be a sulfuric acid concentration of 0.25 mol/L, a pulp density of 10%, an extraction temperature of 20 °C, and three stages of leaching. Under such conditions, 75% of the Zn should be leached. For Mn leaching, the optimum conditions were determined to be a sulfuric acid concentration of 0.25 mol/L, a Na₂S₂O₅/Mn stoichiometry of 1, a leaching time of 120 min and two leaching steps. In this case, 100% of the Mn should be leached.

Type de document: Article
Mots-clés libres: Box–Behnken design; leaching; manganese; pyrometallurgical sludge; steel manufacturing industry; zinc
Centre: Centre Eau Terre Environnement
Date de dépôt: 23 avr. 2018 15:11
Dernière modification: 23 avr. 2018 15:11
URI: http://espace.inrs.ca/id/eprint/3885

Actions (Identification requise)

Modifier la notice Modifier la notice