Dépôt numérique

Occurrence of bisphenol A in wastewater and wastewater sludge of CUQ treatment plant.


Téléchargements par mois depuis la dernière année

Plus de statistiques...

Mohapatra, Dipti Prakash, Brar, Satinder Kaur, Tyagi, Rajeshwar Dayal et Surampalli, Rao Y. (2011). Occurrence of bisphenol A in wastewater and wastewater sludge of CUQ treatment plant. Journal of Xenobiotics , vol. 1 , nº 1. p. 3. DOI: 10.4081/xeno.2011.e3.

[thumbnail of P2199.pdf]
Télécharger (256kB) | Prévisualisation


The identification and quantification of bisphenol A (BPA) in wastewater (WW) and wastewater sludge (WWS) is of major interest to assess the endocrine activity of treated effluent discharged into the environment. BPA is manufactured in high quantities fro its use in adhesives, powder paints, thermal paper and paper coatings among others. Due to the daily use of these products, high concentration of BPA was observed in WW and WWS. BPA was measured in samples from Urban Community of Quebec wastewater treatment plant located in Quebec (Canada) using LC-MS/MS method. The results showed that BPA was present in significant quantities (0.07 μg L–1 to 1.68 μg L–1 in wastewater and 0.104 μg g–1 to 0.312 μg g–1 in wastewater sludge) in the wastewater treatment plant (WWTP). The treatment plant is efficient (76 %) in removal of pollutant from process stream, however, environmentally significant concentrations of 0.41 μg L–1 were still present in the treated effluent. Rheological study established the partitioning of BPA within the treatment plant. This serves as the base to judge the portion of the process stream requiring more treatment for degradation of BPA and also in selection of different treatment methods. Higher BPA concentration was observed in primary and secondary sludge solids (0.36 and 0.24 μg g–1, respectively) as compared to their liquid counterpart (0.27 and 0.15 μg L–1, respectively) separated by centrifugation. Thus, BPA was present in significant concentrations in the WWTP and mostly partitioned in the solid fraction of sludge (Partition coefficient (Kd) for primary, secondary and mixed sludge was 0.013, 0.015 and 0.012, respectively).

Type de document: Article
Mots-clés libres: bisphénol A; partitionnement; rhéologie; eaux usées; boues d'épuration
Centre: Centre Eau Terre Environnement
Date de dépôt: 18 nov. 2020 19:29
Dernière modification: 18 nov. 2020 19:29
URI: https://espace.inrs.ca/id/eprint/9534

Actions (Identification requise)

Modifier la notice Modifier la notice