Dépôt numérique
RECHERCHER

Lifetime Enhancement of Visible Light Induced Photocharges in Tungsten and Nitrogen in situ Codoped TiO2:WN Thin Films.

Delegan, Nazar; Pandiyan, Rajesh; Johnston, Steve; Dirany, Ahmad; Komtchou, Simon; Drogui, Patrick ORCID logoORCID: https://orcid.org/0000-0002-3802-2729 et El Khakani, My Ali (2018). Lifetime Enhancement of Visible Light Induced Photocharges in Tungsten and Nitrogen in situ Codoped TiO2:WN Thin Films. The Journal of Physical Chemistry C , vol. 122 , nº 10. pp. 5411-5419. DOI: 10.1021/acs.jpcc.7b11266.

Ce document n'est pas hébergé sur EspaceINRS.

Résumé

La transcription des symboles et des caractères spéciaux utilisés dans la version originale de ce résumé n’a pas été possible en raison de limitations techniques. La version correcte de ce résumé peut être lue dans le document original.

We report on one-step in situ codoped TiO2 thin films synthesized by cosputtering. The purpose of this acceptor–donor passivated codoping approach is to overcome the optoelectronic limitations that arise for monodoped TiO2 in photocatalytic applications. To evaluate these added benefits, the TiO2:WN thin films were characterized by different techniques. X-ray diffraction patterns and X-ray photoelectron spectral analysis revealed that both N and W dopants are mostly present in the desired substitutional locations. Additionally, the codoping approach was found to reduce the internal strain and defect density of the TiO2:WN films as compared to their monodoped TiO2:N counterparts. This defect reduction is confirmed via photocharge lifetime variation obtained using visible light flash photolysis time-resolved microwave conductivity measurements (FP-TRMC). Photocharge lifetime analysis indicated the presence of three distinct decay processes: charge trapping, recombination, and surface reactions. These characteristic lifetimes of the codoped TiO2:WN films (i.e., 0.08, 0.75, and 11.5 μs, respectively) were found to be about double those of their nitrogen monodoped TiO2:N counterparts (i.e., 0.03, 0.35, and 6.8 μs), quantitatively confirming the effective passivating outcome of the tungsten–nitrogen codoping approach developed here. The practicality of this method was confirmed by integrating the TiO2:WN films as photoanodes for the electro-photocatalytic, solar light driven degradation of a real pollutant (i.e., atrazine). A significant increase in the degradation kinetics, leading to a 4-fold increase in the pseudo-first-order degradation constant for the optimally doped TiO2:WN photoanodes (0.106 min–1) from the undoped TiO2–x ones (0.026 min–1), is a direct consequence of the increased photocharge lifetimes in tandem with visible light photosensitivity.

Type de document: Article
Mots-clés libres: defect density; degradation; doping (additives); light; nitrogen; passivation; photolysis; spectrum analysis; surface reactions; titanium dioxide; tungsten; X ray diffraction
Centre: Centre Eau Terre Environnement
Date de dépôt: 08 mai 2018 15:20
Dernière modification: 15 févr. 2022 15:53
URI: https://espace.inrs.ca/id/eprint/6911

Gestion Actions (Identification requise)

Modifier la notice Modifier la notice