Farcy, Antoine; Mahy, Julien G. ORCID: https://orcid.org/0000-0003-2281-9626; Alié, Christelle; Caucheteux, Joachim ORCID: https://orcid.org/0000-0003-3715-2190; Poelman, Dirk; Yang, Zetian; Eloy, Pierre ORCID: https://orcid.org/0000-0001-5370-1722; Body, Nathalie; Hermans, Sophie ORCID: https://orcid.org/0000-0003-4715-7964; Heinrichs, Benoît ORCID: https://orcid.org/0000-0003-0984-3402 et Lambert, Stéphanie D. (2024). Kinetic study of p-nitrophenol degradation with zinc oxide nanoparticles prepared by sol–gel methods. Journal of Photochemistry and Photobiology A: Chemistry , vol. 456 . p. 115804. DOI: 10.1016/j.jphotochem.2024.115804.
Ce document n'est pas hébergé sur EspaceINRS.Résumé
Three zinc oxides (ZnO A, B, C) with similar spherical morphology but different sizes are synthesized by sol–gel methods. A kinetic study is carried out on the photocatalytic activity of these three ZnO, through the degradation of p-nitrophenol (PNP). A mathematical model is developed and the rate constants of the three catalysts are determined. To understand the parameters influencing the kinetics, the catalysts are reduced to the surface of an isolated particle (assuming perfect dispersion conditions where all catalytic active sites are available) whose size is determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). However, by considering the real case (not a perfect dispersion), it appears that the size of the aggregates induced by the synthesis methods play a more important role in the catalytic activity of the three ZnO samples than defects. A discussion on the formation of these aggregates highlights the importance of the synthesis parameters, like the solvent or the surfactant used to obtain a high dispersion. The dispersion plays a crucial role in photocatalytic efficiency, with kinetics three times higher for the catalyst with the best dispersion. Also, as shown by photoluminescence and Xray photoelectron spectroscopy (XPS), the type and amount of defects play an important role in the photocatalytic performance. ZnO A and B show a defect peak at 620 nm whereas ZnO C shows a defect peak at 680 nm, suggesting a different type of defect on the surface of the catalyst that reduces the photocatalytic performance. Electron paramagnetic resonance (EPR) measurements are performed to identify the type of radicals involved in PNP degradation. The results show that the catalyst with the best dispersion produces the highest amount of hydroxyl radicals. Finally, photoluminescence and XPS analyses underline the type and the amount of defects for the three photocatalysts.
Type de document: | Article |
---|---|
Mots-clés libres: | structure defects; catalyst dispersion; photocatalysis; water treatment; kinetics; ZnO |
Centre: | Centre Eau Terre Environnement |
Date de dépôt: | 01 août 2024 17:34 |
Dernière modification: | 01 août 2024 17:34 |
URI: | https://espace.inrs.ca/id/eprint/15701 |
Gestion Actions (Identification requise)
Modifier la notice |